Quote:
Originally Posted by AFBLUE
That roll pin holds the line in place, The easiest way to bleed the clutch, is to take the master cylinder off the firewall and pull the whole complete slave cylinder master cylinder line and res out all as one and prime it outside the truck
Both the slave and master come out the same way its a 1/4 turn and it unlicks out of its keyed spot.
|
well last time I check the Master was on the tranny
but anyways... when ever you have a truck to bleed the clutch in let me know and I will find one myself and see which one is faster... just undo it from the tranny and pump from there.... while sitting or laying under your truck if you have air in the clutch you can hear the bubbles going up... pump it a could of times and then go put more fuild in the reservaior.... do it till you don't hear any more bubbles... that will not take you no more than 5 mins.... so how long does it take to do it your way???