[73FD]

I just put a 2.5" leveling kit on my F250 and put some 35 's on it. No problems no rubbing or anything, but it looks like its higher in the front now. I measured from the ground to the top of the wheel well and the front is about and inch or so higher, you can really notice Take a look at my picture im my Garage, the really dirty side view one. I also measured my rear block and its like 1 3/4". I just measured the block and not the peice that in connected to the axle, hopefully you know what im talking about. I dont know if some trucks come with a bigger block, could i get one and use the same u bolts, since it only needs one inch there is like 1 3/4" or so of thread sticking up on the u-bolts. Do they make a 3" block?