Thread: Glow Plug relay tested - what are correct voltages?
View Single Post
  #3 (permalink)  
Old 10-13-2008, 09:27 AM
Flinch Flinch is offline
Powerstroke.org Rookie
  

Join Date: Feb 2008
Posts: 18
OK, but what about voltage on SMALL studs?
I get +12v on both large studs, but the question is what about the two small ones? I get +12v on the front small, and .6 volts on the rear small one.

Do BOTH small studs feed the glow plugs? If so then it seems that the rear small stud is not getting proper voltage.

Wish I had a wiring diagram.

Thanks for reply!

Flinch
Reply With Quote