Thread: A/C Problem
View Single Post
  #1 (permalink)  
Old 09-09-2008, 12:11 PM
southern7.3 southern7.3 is offline
Powerstroke Fanatic
 

Join Date: Apr 2007
Location: Barnwell/Bluffton, SC
Posts: 3,355
Send a message via AIM to southern7.3
A/C Problem

Ive got a problem with my a/c. Sometimes when I turn it on the compressor wheel will not engage. I go and pop the hood and took the little electrical connector and you will here the click and the compressor wheel will engage and whala cold air. However sometimes it will cut off and all that. I was thinking what would it do if I cut the connector off from the two wires and directly attached them to the two little metal poles on the other end of the connector. This may be stupid I dont know thats why im asking. Anyone else had this problem.

*****The connector I am speaking of is the connector right behind the oil fill dipstick. It has two wires running from it down into one of those plastic tubes and then two more comming out of that and into the side of the compressor.
Reply With Quote
Sponsored Links