Quote:
Originally Posted by SCUFFY828
if stc bracket has been installed thats fine , i dont get the goin lean thing , thats oil pressure , not fuel , but whatever , a p0606 is internalpcm failure , replace pcm , thats correct
|
This is just from my understanding of how the injector system operates and reports from the observations of other individuals that have had a HPOP system leak or failure.
Because the injectors are HP oil based/actuated; when the HPOP leaks and can't build pressure; the injector can't operate fully (or at all) thus it doesn't deliver the proper fuel load (thus going lean) irregardless of the fuel pressure.