swap 97PS into 91 IDI

[furbis]

I currently have a 97 Fsuperduty and found a 91 ccfb f350 that I might be able to pickup reasonable. from what I read on here after doing a search it looks like a swap from my 97 ps would be pretty straigh forward since I have a good running truck with all the parts does that sound right?

I like my 97 but it is a SC and my family does not fit and I bought it cheap so I would not shed any tear's to pull all the good stuff out and put it in a truck that would suit me better.

anyone have a link to a thread that would point me in the right direction?

[STANGMAN893]

Kind of curious too.Was thinking about doing this with a 93 f350 also.

[hondacrf450x]

me too. i'd like to put a '99 from an e350 into a 94 k model f250.

[robmoore11]

i was talking to a fellow that did a stroker swap into a 86 bronco and he said you remove wiring from the IDI from front to back. and take all wiring from the PSD truck and put it into the IDI front to back and then just a straight motor swap.

[RPurdy]

I saw a write up on a guy that did it with a gasser to PSD in an OBS. Was pretty straight foward. Just redo all the wiring etc then just the engine

[netpro]

hmmmmmmmmmmmmm sounds simple enuf ...