O-rings gone bad for second time in 2months?!?

03f3507.3 · #1 (**permalink**) 11-26-2006, 08:53 AM

I know most people have trouble with the o-rings going out on the hpop... or at least i think this is it again because oil is pooling on the top of the motor and making its way down to look like the rear main seal is leaking....but mine has went out twice in the last 2 months what can i do to keep it from doing this would the high pressure oil line crossover hose help?

**mschn99** · #2 (**permalink**) 11-26-2006, 10:31 AM

Quote:

Originally Posted by 03f3507.3

I know most people have trouble with the o-rings going out on the hpop... or at least i think this is it again because oil is pooling on the top of the motor and making its way down to look like the rear main seal is leaking....but mine has went out twice in the last 2 months what can i do to keep it from doing this would the high pressure oil line crossover hose help?

repaeat failures are usually due to over torquing the fittings

03f3507.3 · #3 (**permalink**) 11-26-2006, 10:43 AM

ok thats a possibilty but do not really know due to the fact I took it to the dealer since it was still under warrenty last time guess ill have to do it this time around.....

**mschn99** · #4 (**permalink**) 11-26-2006, 10:45 AM

make them do it again

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode