|
|
|
|
- HOME
- FORUMS
- GARAGE
- ARTICLES
- CHAT
- CLASSIFIEDS
- VIDEOS
- TECH
- STORE
- SPONSORS - - REGISTER - CALENDAR - SITE HELP - ARCADE - STAFF - MEMBERSHIP - GET A QUOTE |
|
Welcome to the Ford Powerstroke Diesel Forum, the fastest growing Ford Diesel Community on the internet! You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us |
|
|||||||
|
|
|
 |
|
|
LinkBack | Thread Tools | Display Modes |
01-13-2008, 09:15 PM
|
|||
|
|||
|
Starting problems
well this has become a real problem i have a 99 psd my problem is if the truck has sat over night 70 degrees out side it will not start unless i pull the intercooler tube and spray it with wd 40 when it does start it will only hit off of a fue cylinders but it will pickup the rest as it gets warm but even when it is hot some time it will still miss on a couple cylinders off and on i know this for a fact cause with the valve covers off you can watch the oil returns and the funny thing is it is never the same cylinder i have a long list of new parts witch i will list later and i have fully checked the valve cover gaskets and glow plug system so i know that they are working i also have pulled a fuel pressure test i am geting 65psi out of the pump i am getting no codes from the computer the truck will pass a cylinder contrbution test and the buzz test i have done them both about three times
parts list idm cps rebuilt motor turbo hpop injectors glow plugs 
|
| Sponsored Links |
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
