Quote:
Originally Posted by CHenry
The principle behind this is volume produced versus volume consummed.
In a truck that has a displacement of 7.3 liters, you would have to build several of these "cells" to power the engine 100%...probably have to fill the entire bed with them. However if you do with with a small 2-3 liter car, you could almost build enough cells to power it 100%
So in these large fuel sucking trucks a 2 cell setup will add extra fuel and when injected, the pcm will defuel at the injectors and use less diesel fuel because its not needed. Thus you will see a rise in your fuel milage. a two cell setup is the largest i have seen that will fit under the hood on a PSD.
Theres a complete thread with soem good pics over in the Alternative Fuels forum section.
|
Clay, you've phisically seen this in action?