Looks like it should work.
Just be certain that the oil temp is at least 120* and you flow rate is about 8gpm. You will love it. Dont discard the oil that comes out of the inner wall. Simply let it settle a little bit, and remove all but the bottom inch and reprocess. I have had a simple centrifuge running since Randy and Mike introduced it a few years ago and love it. Remember 120* plus and 8 gpm. Very important!
TIP-
go to a sport shop and buy a tube of bore grease for a muzzle loader. Put it on the shaft and in the bowl recess. It makes the bowl come off way easier!