View Single Post
  #10 (permalink)  
Old 07-07-2008, 12:27 PM
Dirk Dirk is offline
Diesel Innovations
 

Join Date: Jun 2007
Location: Fort Worth, Texas
Posts: 9,867
Quote:
Originally Posted by CSIPSD View Post
Your superchips should have a code reader function. If you dont have any ICP codes then you dont really have an issue. Some HPOP's run higher then others, but with the superchips programing you should not see anything that great with ICP pressures anyway.

Your right there in AZ... Talk to Dennis at ITP, and order up AE, then you can watch and data log anything the PCM can look at, run and test about anything a Ford shop can... Best $300 you can spend on your truck!


With 35s and stock 3.73's its going to feel a bit laggy... Your boost numbers are not that bad for a superchip, with a good chip you should see near 25-28 psi.

These trucks will run fine with anywhere from 30psi to 75psi of fuel pressure, they are not dependant on fuel pressure for power. Check it, but if its at 55 or better at idle its fine.
Agreed.
Reply With Quote