I guess I'm missing what can happen here everyone. I've built a couple drag cars in my life, do ALL my own work and am a complete vehicle nut, so installing this was a no brainier as far as I was concerned. I drilled a hole in my manifold, tapped it and inserted a brass fitting with a temp sensor in it. The sensor is a heat sensor - if heat makes it break apart there's a slight problem. If the brass fitting.......well that's not gonna happen. I'm just confused and would like to see a link or something from Mr. Google where someone had this problem, so I can ask them what happened. The sensor is designed to be tapped into the manifold to register temp.
DON'T MAKE ME SUE ISSPRO - I just for once in my life followed the instructions. :p