![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
| 6.7 Performance Parts Discussion 6.7 Performance Parts Discussion |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Air Dog 2 Beware
First of all if u have a short bed or super cab you will have to mount on the outside of frame
other problem I ran into is one of the female fittings was machine wrong and it was to small spent 2 hours shaving the male end down enough to fit in the female end and pureflow stated all equipment is tested before shipped... dah ****.. but after 5 hours and a 6 pack all went on perfect and very noticeable throttle response.......
|
| Sponsored Links | ||
Advertisement | ||
|
|||
|
Nice write up. Did you have to drop the tank down?
Sent from my DROID RAZR using AutoGuide.Com Free App |
|
|||
|
Yea dropping the tank made it easier to remove stock hose and hook up new one... another thing the clamps that hold the hoses down have a tab that gets pushed in and the bottom of it gets pushed out... took me like 30 mins to figure it out hahah
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|