![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
| 6.7 Performance Parts Discussion 6.7 Performance Parts Discussion |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
leveling kit questions
my buddy put a leveling kit on his 2011 f250 and the rear sits about a 1" lower that the front now. someone told him that he can get blocks off a f350 cause they are about a 1" taller than the stock f250 blocks. anyone know about this or know what to do to fix this?
|
| Sponsored Links | ||
Advertisement | ||
|
|||
|
They sell kits for the f350 blocks with longer u-bolts and the works. But yes that is what he needs to do.
|
|
|||
|
yo there easy motorsports.. i got an 11 f-350 with the 11,500lb springpacks. spent quite abit of time researching before i levelled mine. there is about 3.5" diff between front and back. i installed a 1.5" levelling kit. somehow the diff now is just over 1". but the reason i lifted the front only partway is that if it is level empty then its going to lookand feel over-loaded when you do put anything in the bed or pull trailersor eq like i do. keep the back a little higher for weight capacity...good luck...regards...dc.snowball.
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|