Ford Powerstroke Diesel Forum banner

Health report

705 views 2 replies 2 participants last post by  bo1966 
#1 ·
When I try to run a health report I get a message saying the mileage is too low and I need 200 miles on the OD. I just turned 7,000. I have run them twice in the past with no problem. I do have the CTS insight and unplugged it and still get the same message. Any ideas?
 
#2 ·
When something is plugged into the OBDII port, it causes this problem. What I do is unplug my CTS2 prior to starting the engine and then drive till the parameters are met, i.e., engine warm, miles, etc, before attempting a Vehicle Health Report. Once the report is sent, I plug the CTS2 back into the OBDII port even while driving.

This info is per questions I posed to the Ford IVT team on this or another forum.
 
  • Like
Reactions: ZMANN
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top