- HOME - FORUMS - GARAGE - ARTICLES - CHAT - CLASSIFIEDS - VIDEOS - TECH - STORE - SPONSORS -
- REGISTER - CALENDAR - SITE HELP - ARCADE - STAFF - MEMBERSHIP - GET A QUOTE - CONTACT US -

Welcome to the Ford Powerstroke Diesel Forum, the fastest growing Ford Diesel Community on the internet!

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us

Go Back   Ford Powerstroke Diesel Forum > Ford 08 and newer 6.4L Powerstroke Forums > 6.4L Performance Parts Discussion
Active Topics Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

6.4L Performance Parts Discussion What has or has not worked for you?

 
       

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 08-21-2008, 09:32 PM
Hunting&Horses Hunting&Horses is offline
Powerstroke.org Rookie
 

Join Date: May 2008
Location: Moses Lake
Posts: 9
Best Intake With Spartan

I finally have my Spartan DD and took it out. I romped on the throttle and just as I have read on this site somewhere, the "check air filter" notice showed up. I have seen a lot of discussion on which aftermarket filter to use if you do not have a DPF delete, but what is best if you do and are planning on running the 210 tune?

By the way I reset the lie-o-meter before I started the short trip. When I returned it showed 17.6. Normally it gets about 12 on the lie-o-meter (which runs about 10% high). Can't wait to run a full tank and do the math.
Reply With Quote
Sponsored Links
  #2 (permalink)  
Old 08-21-2008, 09:59 PM
mick1955 mick1955 is offline
Compression Ignition Addict
 

Join Date: Jun 2008
Location: Hendersonville, NC
Posts: 397
I have the AFE, and for along time got not CEL's, but all good things come to an end and it starting throwing a CEL. I do like it, but if I had to do it all over again, I would go with S&B. I don't believe anyone is having problems with them... Just reset the filter minder till you get an intake system, that's what I did. Don't trust the lie-o-meter, mine is way off using the 250 tune, almost 8. I have gained about 3-3.7 as long as I keep the rpm 2000 and below. Make sure you are running the latest firmware, 1128 and the newest config file. Have fun...
Reply With Quote
Sponsored Links
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT -8. The time now is 06:42 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.0.0
vB.Sponsors