6.4 build direction?

[fr9090]

hey everyone. as of now for performance i have the xrt pro,banks intake,5 inch mbrp,basic egr delete. what im considering is ordering the coolant filtration from sinister,the full cooler delete and there intake horn also. curious if anyone is really running there intake horn and what they think about it? also where would be the best place to mount the coolant filter? also have the edge insight cts on the way to moniter all this. thanks

[fordpwrstroke7]

What do you use your truck for? That'll help people make recommendations.

[fr9090]

Daily driving and pulling anything from 10 ft bumper pull to tractors on a 30 ft gooseneck

[F250Marine]

The sinister intake elbow is good. I would also do 3 in cac pipe the will help lower your egts when pulling heavy, since the stock one is so restrictive. Also I would do a 4in down pipe again the stock one is extremely restrictive. Doing all these mods will drop your egts a lot. I think most guys are mounting there coolant filters some where on the drivers side frame rail.

[fr9090]

Great thanks. I did have a plan on changin out the cac pipe also. Any places out there makin a kit for the crank breathers? Bottles or filters?

[ramonpowerstroker]

I made my own catch can, works pretty good