Need help with spartan dashdaq!!!

[F250Marine]

i just received my spartan tuner. i loaded the 150hp dpf on tune since just to try out till sunday when i have time to delete the dpf. i was trying to set up my gauges to monitor my egts and tc slip but cant find them any where in the signals to choose from. I have a 2008 job 1. also any input on what you guys are also monitoring or suggestions are welcome for this new guy.

[08stroker250]

EGRTA is pre-turbo exhaust temp. I wouldn't worry about monitoring torque slip with that tune. It's listed as TQSILP (rpm) I believe.

[raftdaddy]

not to hijack, but i have had my spartan for about 20k now and besides the egt i really have no idea what everything else means either. this would be a great sticky on what each one stands for,what to look for etc.i know many guys troubleshoot with it so it would be great to have it all out in front of you. and while i'm at spartan,make a turbotimer for it too!!!

[F250Marine]

No worries raftdaddy. I'm am wondering the same things. As of right now the dashdaq is only receiving 31 signals from the sensors on the truck I still can not find the signal to monitor egts or TC slip. I just did my delete today and am running the 210 el. An actual break down of what all of these signals are and what they do would be great. Also probably save a lot of people from calling spartan and asking wtf. Which I plan on doing tomorrow lol. Later I will list all the signals I get from my truck and hopefully someone can explain them all to us new guys.

[frusteri4]

Go to spartans website forum ,I think its there as a sticky
pete

[08stroker250]

We have a sticky on our tech support forum. If you aren't already a member, email tech@spartandieseltech.com to get set up.

[F250Marine]

Thanks for the reply Jeff. I have been on there and read the sticky, I still can't seem to find them on the dashdaq. I will be sending in disclaimer tonight to finish getting registered. Also later tonight I will post all of the signals I am receiving, and hopefully you can tell me which ones they are from what it is reading.

[08stroker250]

Are you viewing Ford Specific parameters? You may be viewing Generic OBDII parameters.

[F250Marine]

I believe I might be viewing the obdII generic parameters, how do I switch to the ford?

[blackcloud2k]

Originally Posted by 08stroker250

Are you viewing Ford Specific parameters? You may be viewing Generic OBDII parameters.

What he said. If you havent figured out by tonight then I can help you when I get back to my truck.