more power

[makinpower]

Is a Guy able to squeeze a 1000HP out of the motor without going with NO2

[Garett742]

yes there is a king ranch for sale around here somewhere 1040hp on just fuel wants 70k for it

[03silvertj]

Anything is possible for the right amount of money.

[08stroker250]

It can be done....but it won't be cheap.

[makinpower]

What's a guy have to do to get that kind of power?

[Moto2four]

Originally Posted by makinpower

What's a guy have to do to get that kind of power?

Drop a blank check and a new truck off at elite diesel and till them you wanna go fast.

I'm now positive on how much it would cost, but I wouldn't be surprised to hear it cost ~$40k

[08stroker250]

Originally Posted by makinpower

What's a guy have to do to get that kind of power?

You have several options. It really depends on if this is going to be a street truck or not.

[makinpower]

It will be a street legal truck. It does see the track once in a while but mostly street

[Fantom]

Originally Posted by Moto2four

Drop a blank check and a new truck off at elite diesel and till them you wanna go fast.

I'm now positive on how much it would cost, but I wouldn't be surprised to hear it cost ~$40k

I think you're about halfway there.

[08stroker250]

Originally Posted by makinpower

It will be a street legal truck. It does see the track once in a while but mostly street

So you're going to want a good spooling setup that is as low smoke as you can get with 1,000 HP.....I'm assuming at least?

I would do compounds, big fuel, built motor (billet rods, coated pistons, beefed up valvetrain, etc.), Elite's stage 5 transmission, and custom tuning.