Flo~Pro 304SS 3" High-Flow Intercooler Pipe install question

brkncly · #1 (**permalink**) 09-05-2012, 06:27 PM

I just bought a Flo~Pro 304SS 3" High-Flow Intercooler Pipe, plan on installing it this weekend. Has anybody installed this? It didn't come with any instructions on where to grind out for the pipe, so for those of you that have could you please post a picture of where you grind out for the pipe. Don't want to grind out in the wrong place or grind out to much, thanks.

JOE_JOE · #2 (**permalink**) 09-05-2012, 06:43 PM

Use a saw zaw and cut the black metal out. Cut out as much as you can.

Sent from my Autoguide iPhone app

brkncly · #3 (**permalink**) 09-05-2012, 06:46 PM

Thanks Joe Joe! Any way you can enlarge that picture it's pretty small. Did you notice any improvement or lower egt after install this?

JOE_JOE · #4 (**permalink**) 09-05-2012, 06:51 PM

I can txt you the pic. Pm me your number. And honestly not sure. I installed that and my new exhaust. Including 4"DP and 5" back at the same time. I've noticed that at WOT running the KEM 345 tune that my egts stay a little lower. I wanna say maybe 1350. I have my alarm set for 1150 just to be safe.

Sent from my Autoguide iPhone app

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement