Ford Powerstroke Diesel Forum banner

EGR valve monitoring with Dash Daq

779 views 1 reply 2 participants last post by  08stroker250 
#1 ·
I normally run the Spartan 250 tune (which I understand only cycles the the EGR a little at idle). Over the weekend I changed to the 175 to try to cycle the EGR some. I bought my trunk used and the previous owner had run the 250 for about 17000 miles. The truck now has 65000 miles.
I have read that there is some way to show EGR valve position on the the DASH DAQ. Where exactly do I find this info?
Also how can I register to get on the Spartan site? All I get when I try to register is, (Sorry, registration has been disabled by the administrator.)
Thanks
 
#2 ·
The EGR valve parameter is under Generic OBDII parameters. It is labeled as Commanded EGR. To get setup on the website, email tech@spartandieseltech.com :thumb:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top