Nitrous jetting help??

KTMotoRider1 · #1 (**permalink**) 07-19-2010, 10:01 PM

Hey guys Im getting ready to dyno my truck and obviously Im looking for the maximum power I can make with the fuel I have available. I have the .088 jet installed right now which I understand is approx. 160hp. Does the spartan 350 fuel more then the 310 and allow more nitrous?? Thanks for the help guys!

**08stroker250** · #2 (**permalink**) 07-19-2010, 10:07 PM

If your motor can handle it, you can throw more at it than that. These trucks do really well with nitrous if back pressure is controlled.

KTMotoRider1 · #3 (**permalink**) 07-19-2010, 10:13 PM

stock motor lol will see what shes got any ideas on how big of a shot??

**08stroker250** · #4 (**permalink**) 07-19-2010, 10:21 PM

You could go to a .093 or a low .1XX

You have studs and a wastegate right?

**greasltn** · #5 (**permalink**) 07-20-2010, 03:44 AM

If you're studded and wastegated, you can go with .093 or .110. The .093 will be safer on your engine.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement