sct and egr blockoff plates

mudracer · #1 (**permalink**) 10-03-2009, 07:58 PM

does any one know if i can run egr blockoff plates with the sct tunner. when i load the tunes it asks me if i have didabled the egr. I would like to block the egr off but i dont want to get codes. thanks in advance to any help on this mater.

bradranger · #2 (**permalink**) 10-05-2009, 04:57 AM

I have the SCT with no egr plates and get no codes. Hope this helps!

hoosier golfer · #3 (**permalink**) 10-05-2009, 05:10 AM

Yes, you can run block off plates whith the SCT.. When setting up your tune disable the EGR and you will have no codes!

mudracer · #4 (**permalink**) 10-05-2009, 09:04 PM

thank you hoosier that is what i was looking for. do you have personal expericence with this?

**08stroker250** · #5 (**permalink**) 10-05-2009, 09:36 PM

You have to have custom tuning with your SCT mudracer if you want to run the plates. From what I understand that EGR disable option is for custom tuning only. I see that you have IDP tunes, so that will work. Eric will just have to write the tunes for you to run the plates with no codes.

**CobbsDieselPerformance** · #6 (**permalink**) 10-06-2009, 05:18 AM

Tune revision 1.32OR will have the EGR Code option to set to off.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode