![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
auto to manual swap????
has anyone did a manual swap in an 08? if so how much it cost im tired of working on my auto all the time
|
| Sponsored Links | ||
Advertisement | ||
|
|||
|
bump i need help please
|
|
|||
|
Im wondering the same thing, Bump!
|
|
|||
|
Haven't heard of anyone doing it. I would think it'd be close to the way you do it on any other SD.
|
|
|||
|
Been looking at the same thing myself. Spoke with a few folks and did a little figuring. If you use a donor vehicle you can get most of the parts you need, and there are a lot of thing needed.
Start with the T-cases input shafts are not the same from Auto to Manual. 34 spline on the Auto and 32 on the manual. Need a PCM module and wiring harness Drive shafts clutch and master clynder and associated tubing Flywheel Pedals and associated wiring for things like CC and interlock switches and a few more things as well. Looking at $4-5K plus time to remove the old stuff and uinstall the "new" stuff. Cab off would be great. |
|
|||
|
oh wow sound expensive but interesting. at times I'd rather have a manual trans.
|
|
|||
|
I know you don't want to stick with the stock clutch in these whenever you tune them. Brand new out of the box they slip tuned haha
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|