NEED SEAT WARMER HELP

[hyperlite]

my 08 seat warmers wont stay on more than 10 min. dealer and manual say this is correct. any body figured out how to make them stay on till I turn them off or turn off truck?

[Goose350]

Shoot, the ones on my 05 stay on all the time. Even when you turn the engine off it doesnt reset them and they will come on on the next start up.. But i dont know, free bump

[Backlash]

Mine stay on all the time. (or at least the light stays on) I usually turn mine off after a couple minutes. I just take the edge off, but my wife likes to ride with them on all the time. She did say that they cycle on/off, but I think the light stays on the entire time.

Are your seats shutting completly off? I had a Jetta that would turn themselves off, but the wife's Liberty stays on till you shut them off.

[Cumminspower11]

My girlfriend has hers on all the time also and say that it will get real hot, then cool down, then get real hot agian.

But, for some reason, my side quit working the other day... I had my truck vacuumed out the other day at a Four Seasons wash, maby someone accidently unplugged something under the seat...? Help me!

TIA boys!

[winchester33]

welcome to the org. you can probably go to a fab shop and get it done. i wish i could have mine on the back of the seat too.

[hyperlite]

mine shut off and dont come back on, light on the dash shuts off to. just went and checked my manual and it says seats shut off after 10 min. stupid seats

[korterman1]

EAT BEANS

[Spatel23]

sorry to hijack but Ive been trying to figure out how to get them to come on automatically with remote start or even just leave them on when I turn the truck off and have them on when I remote start?
Any ideas?

[Cumminspower11]

bump....................

[zeddy]

do an internet search ofr heated seat parts
there are places that sell parts for heated seat systems, many of which clain that they are oem suppliers maybe you can contact them and see if you can connect an other heated seat controller(power supply) in parallel and connect it to one of the extra outputs on your remote start, like the truck release and most of them can be programmed to be a latching output.
or they might be able to provide some guidance
HeaterSeats.com - The Future is Warm