2.5 leveling kit up front 1'' billet blocks in the back.

[FX4STROKER]

Just thought I would show yall some pics of the truck with the baby lift I got on it. Its the 2.5 coil spring spacer in the front and the 1'' billet blocks in the back. I wish I would have gone with the 2" blocks in the back. But thought I would share.

Before and after pics.

[TwinTurboStroker]

Looks much better, but you need to do something about them non-tinted windows

[FX4STROKER]

Originally Posted by TwinTurboStroker

Looks much better, but you need to do something about them non-tinted windows

I know its on my list. The shop that does them is like an hour away and they take forever. How hard is it to do your self?

[RJM06590]

ive always done my own tint. but if youv never done it before buy a few rolls. Truck looks good

[FX4STROKER]

Originally Posted by RJM06590

ive always done my own tint. but if youv never done it before buy a few rolls. Truck looks good

what about the pre cut stuff?

[wadepowerstroke]

what size tire and wheel do you have I guest got my 2.5 ready lift and dont what size tire to get I have 18 inch wheels thanks for any help

[FX4STROKER]

mine our just stock 20's and stock tire size is 34.2 on the 20's. im gona go with 37x12.50s when my tires go bald

[08stroker250]

Originally Posted by FX4STROKER

mine our just stock 20's and stock tire size is 34.2 on the 20's. im gona go with 37x12.50s when my tires go bald

Will it fit that size of tire with that lift. I ran a Nitto 325/65/18 on my truck with a 2.5" leveling kit. Those tires are 34.88 tall and 12.9 wide and they rubbed my drivers side radius arm

[FX4STROKER]

Yeah they will fit. they back spacing on the stock 20's alows it. It will rub on the raidus arms at full lock but almost any lift does that

[KRAYZKAJUN]

my kit is in my living room ready to be installed. I got the 4" replacement blocks for the back.(adds 2"s to stock)

how hard was it to install???