? for you lifted 6.4 guys

[DUstroker08]

I'm considering getting a 4.5 " lift and 37" toyos or kumhos. Do u guys know how much taller I would sit? Or where to measure from? Forgive me if I'm dumb and u just + 4.5" ha thanks.

[Goolsbymd]

I cant give you an extact ## but i will tell you, your gonna rub with 37s a lot.
I got 6" lift and rub on the front inner fender well and bumper at full turn. however i just cut some of the inner fender well and put some longer bolts and washers to space my bumper out alittle further away.

[DUstroker08]

there's a guy with 37's and a 2.5 leveling kit with rockstars and no rubbing I'll post the link soon

[cheek]

mine dont rub at all!!!! just do the research before u buy.

[Overkill]

Originally Posted by DUstroker08

I'm considering getting a 4.5 " lift and 37" toyos or kumhos. Do u guys know how much taller I would sit? Or where to measure from? Forgive me if I'm dumb and u just + 4.5" ha thanks.

You will gain approximately 4.5" lift from the system plus roughly 2" from the 37s for a total of 6.5" over stock. However not all 4.5" systems are created equally. We have found that the Icon systems are slightly taller than most. If you allow yourself 7" over stock you should be safe. Here are a couple of examples of that combination:

Icon 4.5" on 37" Kumhos MTs


Icon 4.5" on 37" Toyo MTs


We have done a number of trucks with this combination with no rubbing issues. There are however a few tricks to configuring the proper set-up.

[rsherrard]

Slightly off topic... however, what's the rim width on the Ford factory 20's?

Rob

[Overkill]

Originally Posted by rsherrard

Slightly off topic... however, what's the rim width on the Ford factory 20's?

Rob

The factory 20s are 8" wide.

[LBZinthehizhood]

Hey cheek post a few pics of your truck please. I am really close to buying new tires... all along I was going to do 35's but may consider 37s

[cheek]

[cheek]