![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
| 6.4 Exterior Discussion Body and Accessories Talk |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Want to put 35-14.50-22 w/ leveling kit
Wanting to put 35-14.50-22 super swamper irok radials on my truck. I heard that super swampers run a lil smaller on there tires sizes . I squezzed 35-13.50-20 mickey thompson atz's on my 2002 f250 w/ leveling kit, had some rubbing . also the newer trucks i hear can fit a lil bigger tires than the old ones w/ leveling kit. Do you guys think i will have to much of a rubbing issue?
|
| Sponsored Links | ||
Advertisement | ||
|
|||
|
Dunno, whatcha drivin now?
![]() Quote:
|
|
|||
|
2008 f250 c/c 4x4
|
|
|||
|
you should be ok... worse case, you have to trim the lower corner of the lower valance and about an inch off the bottom of the plastic fender well, closest to the door of the truck.
What wheels are you putting on? |
|
|||
|
i think im going with KMC badlands 22x11
|
|
|||
|
I think this question is SO LARGELY DEPENDENT on information about offset and backspacing that no one can truly give you an accurate answer. In all fairness it appears all you've been given are opinions which is the safest route at this point. My personal opinion is it's going to be a tremendous stretch.
|
|
|||
|
appreciate guys i think im going to give it along shot i will let you all no how it goes they will be here in about a week r so . thanks
|
|
|||
|
Wheel and tires are in, i willl have some pics up soon
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|