Cab Light Install

kmuncc · #1 (**permalink**) 01-10-2013, 02:47 PM

I installed my recon cab lights today for the most part still have to wire them, I cant find the wire for the parking lights or the so called connector for the factory clearance lights, does anyone have experience doing this and can tell me where and what wire I need to be looking for?

joshua5438 · #2 (**permalink**) 01-11-2013, 08:39 AM

The plug in on the drivers side behind the park brake. Its a pain to get to. It seems like it was a round plug with only two wires. I would have to do some searching to remember for sure what wire is hot...

kmuncc · #3 (**permalink**) 01-11-2013, 08:55 AM

with my satellite radio and my alarm under there its hard to get to anything but Ill look again

**colberjs** · #4 (**permalink**) 01-11-2013, 09:01 AM

When I installed on my '06 I just turned on the parking lights and found the hot wire out of the back of the headlight switch and tapped it. Worked perfect and every time I see it driving around town (I got rid of it a year and a half ago) the lights are still shining bright no matter what time of day the kid is driving it. Lol

travisH3 · #5 (**permalink**) 01-11-2013, 12:54 PM

I can't remember if my 2010 was in the driver or passenger kick panel. I know the older trucks, the connector is square and in the passenger foot well. 2010 had round plug if I'm remembering correctly.