2nd set of aux switches

[kremco]

is it possible to put a second set of upfitter switches in a 08 that has a set already

[tony97gt]

I could be wrong here but I would say "no" because where would you plug them in? The only harness that is there for upfitters is being used for the original upfitters. Now if that is accurate then of course you could install a second upfitter switch panel and run your own wires/relays to be used with it, but as far as I know there is only one upfitter harness that is pre-wired form the factory.

[Alberta Advantage]

Someone on here did it. I forget their username. They put another set of OEM switches in the left cubby hole that's below the 4wd switch and beside the drink holder on the floor. Looked really good too. I might have the picture kicking around somewhere as I was looking at doing that mod too.

[h1gg1n5]

I think this is what your looking for, second post down:

Extra Auxiliary Switches / Uplifter switch

Here's a set of upfitters on ebay for $35 I found too:

http://www.ebay.com/itm/FORD-SUPER-D...faaea7&vxp=mtr

[h1gg1n5]

Here's a good pic on getting it all taken apart as well just in case you need it.....

[Tuscany]

Originally Posted by h1gg1n5

I think this is what your looking for, second post down:

Extra Auxiliary Switches / Uplifter switch

Here's a set of upfitters on ebay for $35 I found too:

FORD SUPER DUTY F250 F350 F450 F750 PICKUP TRUCK UP-FITTER AUXILIARY LED SWITCH | eBay

Will the switches you listed work in a 6.0 as well or only for the 6.4?

[GregsSD]

Originally Posted by h1gg1n5

Here's a set of upfitters on ebay for $35 I found too:

FORD SUPER DUTY F250 F350 F450 F750 PICKUP TRUCK UP-FITTER AUXILIARY LED SWITCH | eBay

It looks like that is for the switches only, not including the harness and relays.

[GregsSD]

Originally Posted by Tuscany

Will the switches you listed work in a 6.0 as well or only for the 6.4?

I believe that the 6.0 and 6.4 use different sets because the computer is completely different in the 6.4, here are the wiring diagrams for both styles:

https://www.fleet.ford.com/TRUCKBBAS/non-html/Q117.pdf

[mts678]

I definitely like this, looks oem and bada$$! How'd you wire it all up?

[h1gg1n5]

Originally Posted by GregsSD

It looks like that is for the switches only, not including the harness and relays.

Correct but just search ebay and there are other on there with wiring too:

05,06,07 $138.90 with wiring:
FORD UPFITTER SWITCHES AND WIRING 05 06 07 Super Duty | eBay

08,09,10 $160 with wiring:
FORD F250 F350 SUPER DUTY UPFITTER SWITCH KIT 08 09 10 | eBay