CLIMATE CONTROL SWAP

nitropony443 · #1 (**permalink**) 11-05-2009, 09:50 AM

Is it possible to swap the three knob setup in my 2008 Fx4 with heated seats to the dual zone digital climate control? THANKS!!!

nitropony443 · #2 (**permalink**) 11-09-2009, 08:14 PM

I KNOW SOMEBODY KNOWS SOMETHING LOL.

jrod80 · #3 (**permalink**) 11-09-2009, 10:20 PM

I don't know the specifics but assume it would be a very involved and costly process to do so! I've never heard of anyone on the forum attempting it.

**stroken04** · #4 (**permalink**) 11-09-2009, 11:01 PM

Man, I think your biting off one hell of a project

po-po 5.0 · #5 (**permalink**) 11-10-2009, 05:21 AM

The entire dash has to come off to do it, and trust me............you don't want to. The dual zone guys are having problems with the blend doors and actuators.

RKevinB · #6 (**permalink**) 11-10-2009, 05:34 AM

Quote:

Originally Posted by po-po 5.0

The entire dash has to come off to do it, and trust me............you don't want to. The dual zone guys are having problems with the blend doors and actuators.

Yup, blows hot on one side and cold on the other. this is the third time I have had this issue. Doesn't happen all the time, but frequent enough to be a nuisance.

jrod80 · #7 (**permalink**) 11-10-2009, 07:02 AM

Luckily I haven't had any issues. I love the dual climate control with the steering wheel buttons for the fan and temp.

And like was said before...this would be a huge undertaking...not something I would consider doing.

nitropony443 · #8 (**permalink**) 11-10-2009, 09:38 AM

yah i dont rreally want the dual climate control but likr the way it looks and can control it from the steering wheel

nitropony443 · #9 (**permalink**) 11-10-2009, 09:39 AM

Somebody needs to make an aftermarket digital single zone controler that will work with the steering wheel controles

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode