04 6.0 problems

[jmartinez]

ok i left a stop light and the motor cut out a little bit then my tranny started going in and out then my od light started to blink i pulled over and shut the truck off started it again had all no throttle response put truck in gear forward and reverse and nothing then i got all throttle back so i unpluged the batteries and still the same thing i took to ford and they pulled a quick code and it was a p1000 thats they told me because they couldnt get to it today any help would be awesome and when i did the mileage button i got 5 dtcs what are dtcs

[chucky797]

dtc's are Diagnostic Trouble Codes when you plug the scan tool in it says what the computer sees that isn't right....hte p1000 is that you disconnected the batteries and the system didn't get to run all the tests yet....what 5 dtc's did you get and i can look them up for you...

[jmartinez]

they are 262 073 027 059 058 and not sure about this one it is dt68f6 where can i get the dtc code list from thank you very much

[chucky797]

P0126 Insufficient Coolant Temperature for Stable Operation
P0073 Ambient Air Temperature Sensor Circuit High
P0027 Exhaust Valve Control Solenoid Circuit Range/Performance
P0059 HO2S Heater Resistance <<<shouldn't have that one....don't have o2's on diesels....lol
P0058 HO2S Heater Control Circuit High <<<same here its a diesel....lol..u sure thats the code?

here is where i got them at
OBD-II DTC Database - Generic Powertrain Codes (P0xxx, P2xxx, P34xx - P39xx)

[jmartinez]

could it be that i unplugged my batteries and by the way thanks alot for the help

[chucky797]

you won't get hte codes from unpluging the batteries...it clears them all put the p1000...the p1000 is caused from the batteries just says the tests are not all done....P0059 and p0058 are ticking my brain give me a bit to think and ill let u know what i come up with..........that one is so weird..

[jmartinez]

i accidently unplugged my abs yesterday when the truck was running and my light came on for the abs thats why i unplugged my batteries to see if it would reset i also have a sctxcal3

[darsey715]

did it do it with a tune in or stock programming?

[jmartinez]

it was with a tune but i had the tune for 3 months now i dont get on it that often and when it did it i was just barrely pushing the fuel pedal

[darsey715]

return to stock then go from there. that's all I can advise. Jon is scoping this thread out maybe he can help you out a little better. good luck.