crank, no start, tbc fault

[95power]

just got the truck back together maybe a week ago, had the cab pulled off to do a lot of engine work. HPOP, STC, oil cooler, egr delete, studs, blah blah blah. well after about 5 days of driving it, the truck has had long cranking times, not super long but longer than say my dads 05. and looking into it some people say after new HPOP they do that for a while. so i didnt think anything of it. after a couple more days, the cranking time got longer and longer. until i was leaving a buddys house and the truck would not start, and while cranking the TBC light on the gauge cluster was coming on.

any help would be great, my truck is an 06 f250, 173k.

tried looking it up and some people say theres a reset button? cant find it anywhere...

i have an SCT x3 on the truck for the EGR delete and its only pulling glow plug #7 and #5 and the boost solenoid codes. but i have the VGT solenoid on a switch.

[southend]

Need an icp reading, sounds like hpo leak.

Sent from my phone that somebody didn't help me get.

[95power]

not HPOP. good readings on that and my HPOP is brand new with STC fitting upgrade