07 F-250 White smoke on Accel

[matt1030]

Last time I filled up the next day I noticed that the truck was blowing some white smoke when I first accelerate off the line. I figured I got some bad fuel so I got some fuel additive from the dealer. Now two tanks later it's still doing it. It stops around 1500 and everything is normal temp wise and oil level hasnt changed. Any ideas on whats up?

Also I used to have a SCT on it but I put it back to stock incase I have to take it in. They shouldnt see that it was tuned correct?

Matt

[matt1030]

Anybody got any ideas???

[vitalidle]

Clear all your codes and I think you have to drive your truck for so many miles not sure on the miles I think its over a 100 and you should be okay. As far as your tuner is concerned.

[westcoaststrokin]

No clue on the problem but now I can bump the thread for ya.

[tech10002]

I would probably disconnect the battery for a couple hours and then drive the truck for a few days just to be safe. That way you'll be sure the KAM is cleared of anything showing evidence of the programmer and the battery disconnect code will be gone.

[matt1030]

Thanks for the help guys. I'll let you know what the dealer says.

[matt1030]

Got the truck back today. The smoke is coming from all the extra air the motor is getting now with my mods. So the smoke is just extra fuel cause its running rich. So there advice was to take it to get custom tuned for the mods. Just thought i'd let everyone know what was up.

[AvroAero]

Is it just me or is burning black burning rich on a diesel?

[matt1030]

The way it was explained to me black smoke is partially burnt fuel. But im not sure this is just what the tech at the dealer told me. I had the same response when i was talking to him.

[R.KV*22*]

I had thought, More Smoke, MORE POWER! Which basically means, More Unburnt fuel being pushed through the motor no problems, Just power baby!