Help and information about injectors

Superstroke 333 · #1 (**permalink**) 08-11-2011, 05:56 PM

i have an 04 250 and i just recently had my FICM and 4 injectors to go bad. IM looking to replace all 8 and was wanting some at least 100hp injectors and a reman FICM. While i have the cab off im going to install ARP studs and black onyx gaskets and egr delete. just wanting to know if anyone could give me some info as to where i could find some injector help. Was looking into sending them to RCD for their 155cc rebuild. Any suggestions? thanks and God bless!!

***justinmix*** · #2 (**permalink**) 08-11-2011, 06:39 PM

I would stay away from the black onyx head gaskets. Seems like lots of people are having issues with them. I'd only use the OEM style gaskets.

Superstroke 333 · #3 (**permalink**) 08-13-2011, 11:45 AM

thanks ive heard that from a few others too. any thoughts on the injectors?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement