Ford Powerstroke Diesel Forum banner

Help superduty down!

919 views 4 replies 3 participants last post by  dieseldan2005 
#1 ·
I have a 2005 superduty 6.0, 4x4 and it wouldnt crank the other morning, came up with a crankshaft position code so I replaced it. now it cranks and cranks and cranks some more but will not turn over. has a p1378 unknown error code, will try rolling over with starting fluid , fuel is in the top mounted fuel filter but seems like it isnt getting into the cylinders, please any ideas would be greatly helpful, email is keithstang96@yahoo or of course on here , thank you all and happy thanksgiving
 
#2 ·
cam shaft sensor, thats what lets it crank an crank but wont ever turn over, least thats what it was in my truck
 
#4 ·
good luck, hope it all works out
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top