What do you use upfitter switches for?

[HeavyAssault]

I got #4 wired to some additional back up spot lights.......


HONK HONK HONK...(away from home on business)

[KingRanchPSD]

Originally Posted by Goose350

I use my #4 for my High Idle

Engine Idle Control "Mod"

Yeah I wanna do the high idle mod too. Are the wires in the 06 the same color coded as the 05s?

[Goose350]

Originally Posted by KingRanchPSD

Yeah I wanna do the high idle mod too. Are the wires in the 06 the same color coded as the 05s?

Should be the same for all 6.0s

[KingRanchPSD]

Yeah I was reading differant years might have differant colored wiring. Just didnt know if someone had an 06 they already did it on. What kind of situation would use the high idle in? Like cold weather or extended idling?

[Goose350]

Well dont take my word on it. Cold mornings, jump starting someone, long idles, keeps ac cold

[Dave Nowlin]

I use #1 for my HHO system, #3 for my tire pressure monitoring system & #4 is for the idle up.

Dave Nowlin

[GregsSD]

Here's what I use my upfitter switches for:

#1 - Backup lights
#2 - KC Daylighters in front
#3 - Air compressor
#4 - High idle

[ZMANN]

Originally Posted by Goose350

I use my #4 for my High Idle
Engine Idle Control "Mod"

Me also I was going to do another to deactivat the front hubs from locking so I can do 2 lo if I want

[Goose350]

Originally Posted by ZMANN

Me also I was going to do another to deactivat the front hubs from locking so I can do 2 lo if I want

If you get warn hubs you can do 2 low

[6.0joe]

Originally Posted by Goose350

I use my #4 for my High Idle

Engine Idle Control "Mod"

how do i set this up or where do i go to find out how to do this thanx joe.