99-07 CONSOLE SOLUTION FOR SUPERDUTYS

[shatesme]

Hey guys,This is what I did for a console in my 1999 superduty.I was never a big fan of the jump seat.I used a expidition/navagator console.It fits the 99 dash up to 07 dash i know cause I converted my dash to an 07 dash.There are two different consoles,one with skinner console lid for seats with armrest and one with a wider console lid for seats without armrests.I installed a skinner one incase I ever upgrade my seats to ones with an armrest.

http://www.powerstroke.org/forum/mem...7-dsc04399.jpg
http://www.powerstroke.org/forum/mem...1-dsc04397.jpg
http://www.powerstroke.org/forum/mem...0-dsc04395.jpg

[outrage]

It looks great. What year ex/nav did the console come from.

[shatesme]

99-03 console If I remember correctly.I have few of them in my basement.The console is great cause I have 4 cup holders,2 from the dash and 2 on the console.Some of the consoles even came with cd changes and (dont laugh) VCRs in them.

[Switchrider900]

That looks great, does it bolt right up, or do you have to fab anything up? Now, just to find a grey one for my 05!!!

[banshee-rider]

does the cubby under the brake controller still open

[korg70kbc]

looks great, I would love to do that to mine......now find the parts.....

[75' forty]

if you want to take it a step farther, you can swap in a 04-08 shifter assembly with a little fiberglass work. a friend just finished this up recently.


.
.
.
.
edit: if anyone wants to figure out if the 05-07 lid will fit on the wide console i'd appreciate it.

[Super Diesel]

Wow, that looks awesome! I'd much rather have that center console that the one in mine! Can you do a write up on the conversion?

[shatesme]

Thanks guys.I'll try and answer everyones question in one post here.It did basically bolt right up.I only had to file down the bottom middle sides 2 the shape of the floor,but very slightly.And the only problem is you cant open the lower dash cubby/ashtray,But I gained the tray infront of the cup holders on the console and the consoles glove box.
I do have a grey and two tan consoles in my basement maybe I'll ebay them if there is an interest.

[dieselburner21]

Do you know if there would me enough clearance for the 4x4 shifter? If it would fit I would be interested in a tan console possibly