want to install studs.

[dadsbigstroker]

does anyone one no anyone or a place that can help me install studs. in the midwest. I live in sw iowa and want to do most of the work myself. looking for some one who has done it before and maybe help me out. I have no lift put do have 2 pallet lifts that I was thinking of using to lift the cab up about 4 feet.

[bfloyd4445]

Originally Posted by dadsbigstroker

does anyone one no anyone or a place that can help me install studs. in the midwest. I live in sw iowa and want to do most of the work myself. looking for some one who has done it before and maybe help me out. I have no lift put do have 2 pallet lifts that I was thinking of using to lift the cab up about 4 feet.

someone said they can be installed while the cab is on. Is that right guys?

[Texas-Red]

I think they can only be installed with the cab on if you have a 7.3L.

[bluestroker]

it can be done in the cab I know there are someguys that will do it but its a pain in the butt

[AvroAero]

You have to remove the evaporator core and it'll still be uncomfortable. Doable though. Few write ups on here.

[Cobra 19 & 54]

There is a shop here in AZ that does all of them with the cab on, it' called Stricly Diesel and the owners name is Nate. Very knowledgable,and very nice to deal with. I know it's not the midwest but they might give you some good advice.

[bfloyd4445]

Originally Posted by Cobra 19 & 54

There is a shop here in AZ that does all of them with the cab on, it' called Stricly Diesel and the owners name is Nate. Very knowledgable,and very nice to deal with. I know it's not the midwest but they might give you some good advice.

Can you send me the shops contact info?
Thanks

[Cobra 19 & 54]

The number is 480-922-8768, hopefully this isn't against code of conduct. I guess I'll find out.

[bfloyd4445]

Originally Posted by Cobra 19 & 54

The number is 480-922-8768, hopefully this isn't against code of conduct. I guess I'll find out.

Thanks