What to do?

blackbullet · #1 (**permalink**) 04-09-2008, 10:22 AM

I have an 07 Harley Davidson f-250 6.0 powerstroke. it has a 12" rize lift, 40 x 15.50 r 20 toyos, has the xd rockstar wheels right now but keep having them crack so friday i am picking up new mazzi hulk wheels. I have 5 inch mbrp exhaust, that go to 7" aussie cut stacks. I have afe cold air intake, with the banks 6 gun pda. it has 456 gears in front and back. I want to put something new in it to give it make it faster, but I wasn't for sure on what programmers are worth the money. I was also wondering about injectors/turbos. Any help would be greatly appreciated, and i'll try to get some pictures up here this weekend of my truck.

**stroken04** · #2 (**permalink**) 04-09-2008, 10:24 AM

An custom tuned SCT is well worth the money

scheidt27 · #3 (**permalink**) 04-09-2008, 10:24 AM

I would do a custom tuned SCT and see if you want more from there. Innovative and Dj's seem to be the most popular around here

blackbullet · #4 (**permalink**) 04-09-2008, 10:29 AM

also another question would be about the transmission? what kind of upgrades and what else to do to that?

scheidt27 · #5 (**permalink**) 04-09-2008, 10:30 AM

im not a 6.0 guy but ive read several times a good TC and valve body and they hold 550 hp. I'll let a 6.0 guy chime in on this subject though

STROKER06 · #6 (**permalink**) 04-09-2008, 10:34 AM

im pretty sure the banks 6 gun pda is a chip. have you ever tried to change the level higher? but i would get rid of it and get the sct.

**stroken04** · #7 (**permalink**) 04-09-2008, 10:35 AM

the stock tranny is pretty good, You dont really need to upgrade it until you get into major power IMO but im no expert

blackbullet · #8 (**permalink**) 04-09-2008, 01:15 PM

the banks has power levels 1-6, plus the SL setting. 1 is stock and SL is the highest setting, i run it on the SL at all times. How much do the sct chips run, and how expensive are head studs? I've heard from quiet a few ppl if i put head studs in i won't have to worry about the head gaskets going out

STROKER06 · #9 (**permalink**) 04-09-2008, 01:22 PM

studs are around 400+ install but you cant run a programmer and a chip at the same time. if you do you can blow stuff up big time. Dj sells the sct xcal3 and unlimited custom tuning for $425.

blackbullet · #10 (**permalink**) 04-09-2008, 01:24 PM

I know, im going to remove the banks 6 gun and put on something else but i was just curious whats good to run.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement