Where to get 6.0 turbocharger parts

[clcm87]

Hello,

Today when I was working on my truck ('04 6.0 - early model) I found that the turbocharger compressor vanes were chipped on the edges. The bearings are going out of it so I need to rebuild it. I have found the rebuild kit from gpopshop.com but I can't find anyone that sells the compressor wheel.

Does anyone know where to get a new compressor wheel/vane set up for the early 6.0

I found one - bullseye batmowheel, but from what I have read it doesn't seem to be what I am looking for.

Thanks for your help!

[dhanna6powerstroke]

By the time you buy all your parts and then spend the time rebuilding it, you'd be better off going with an upgraded turbo like a stage 1. Check out Mad Turbo Werks. Stage 1 for less than $800 and there are a lot of threads on hear with info on them. The guy that builds them is a member on here.

[risco]

Originally Posted by clcm87

Hello,

Today when I was working on my truck ('04 6.0 - early model) I found that the turbocharger compressor vanes were chipped on the edges. The bearings are going out of it so I need to rebuild it. I have found the rebuild kit from gpopshop.com but I can't find anyone that sells the compressor wheel.

Does anyone know where to get a new compressor wheel/vane set up for the early 6.0

I found one - bullseye batmowheel, but from what I have read it doesn't seem to be what I am looking for.

Thanks for your help!

finding the rebuild kits are hard to find have seen them on ebay.

[twoicebergs]

This was posted in the motor problem forum. Comp and turbine wheels are harder to find parts. As stated in both posts, an upgrade is a better option.