Edge CTS Monitor Question??

**ovrtrn** · #1 (**permalink**) 11-25-2011, 06:14 AM

I am planning to buy the edge cts monitor for my 6.0L and need to know which extra sensors I need to buy or will it read off the trucks sensors?? I assume I need a thermocouple but what else? Also who has the best pricing right now?
Thanks

**a2elvis** · #2 (**permalink**) 11-25-2011, 06:29 AM

Get the CTS with the EGT probe kit with EAS starter kit. With the EGT with EAS you can add all kinds of inputs easily like fuel pressure, backup camera, etc. You will love the CTS!!

**windrunner408** · #3 (**permalink**) 11-25-2011, 06:35 AM

well in all honesty it comes down to what you want to monitor. The CTS will monitor everything but EGTs, Fuel, and oil pressures. If you want to monitor those then you will need the following part numbers: 98603, 98605, and two 98607s. Reference Edge's website for descriptions.

**ovrtrn** · #4 (**permalink**) 11-26-2011, 06:07 PM

Do the add on sensors have instructions on where they go?

**windrunner408** · #5 (**permalink**) 11-26-2011, 07:34 PM

Yes but if the directions dont make sense just ask and we can explain.

kdogg85 · #6 (**permalink**) 11-26-2011, 07:40 PM

what he said. the fuel pressure hookup is a tad tricky, but not anything overly difficult.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement