Water/Meth injection on a 6.0 with an Edge Platinum

miles97 · #1 (**permalink**) 08-10-2011, 06:22 PM

Have search and can't fine anything definate.

But I remember seeing something quite a while ago.

Is it true that the time is wrong when using a Edge Attitude. And adding water or Methenol will cause to much cylinder pressure stretching the head bolts and blow the head gasket.

Just looking to lower EGT's when towing so looking to run more water then Meth.

Thanks for any info

miles97 · #2 (**permalink**) 08-14-2011, 11:05 AM

Nothing at all???
Someone has to have tried it.

Lilpooh · #3 (**permalink**) 08-14-2011, 01:34 PM

Don't know about the Attitude and W/M, but I've been running my W/M with he SCT for about 3yrs without issues. I only use it when towing or playing.

**Lowdown89** · #4 (**permalink**) 08-14-2011, 01:46 PM

If you are just going to use it for cooling run water only and you shouldn't have any problems with it

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement