What monitor to use

roadrashroeser · #1 (**permalink**) 09-28-2010, 05:09 PM

Alright doing an egr cooler delete and new oil cooler and buying a SCT programmer but what monitor is best for watching engine parameters i would like it to be plug in and no piggyback stuff like thermocouples and such please fire away on opinions thanks
mike

**Strokin6Liters** · #2 (**permalink**) 09-28-2010, 05:10 PM

I have heard good things about the CTS

Abrannan19 · #3 (**permalink**) 09-29-2010, 03:56 AM

Edge Insight CTS, we have sold alot and they work very very well.

**Dave** · #4 (**permalink**) 09-29-2010, 04:10 AM

Edge insight CTS. I consider it one of the best mods Ive done to my truck

Goose · #5 (**permalink**) 09-29-2010, 04:15 AM

but you will need the thermo coupler for the pyro

**2006PSDSD** · #6 (**permalink**) 09-29-2010, 04:20 AM

EDGE INSIGHT CS OR CTS, HANDS DOWN

**Brian@sinistermfg** · #7 (**permalink**) 09-29-2010, 08:45 AM

The Edge Insight is a great unit but if your going to buy the SCT you could go with the touchscreen xtreme from SCT. It is also a very nice unit and the added bonus is its Bluetooth so no wires to run to the monitor itself. So it gives you more mounting options.

roadrashroeser · #8 (**permalink**) 09-29-2010, 09:02 AM

basically im going to have to do an egt probe correct

06powerstroke06 · #9 (**permalink**) 09-29-2010, 09:11 AM

yes, no matter what you get to monitor you will have to get a egt probe to monitor your egts

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement