PPE xcelerator/smoke switch help!!

[06lariat4x4]

i have an 06 with a PPE xcelerator on level 7. very pleased with the power and quality of the shifts. the only thing that puzzles me is that in nuetral or park when you rev it it will not blow any smoke.. i installed a smoke switch(spliced blue wire) and when i turn it on it disengages the vanes on the turbo but no smoke will come out. is this PPE's programming or is this my truck???

someone please help!

mitch

[tyhackman15]

I don't think you're going to get much smoke with 0 load on the engine. Have the smoke switch on and leave it in drive when you gas it.

[06lariat4x4]

that is what i did with the smoke switch as well i flipped it on while i was driving and nothing.. zero smoke...

[Snake]

Originally Posted by 06lariat4x4

that is what i did with the smoke switch as well i flipped it on while i was driving and nothing.. zero smoke...

And this is a bad thing because?

Be prepared for a lot of negative replies if you're just trying to make smoke for the sake of making smoke.

[fx4f150]

I would say its the ppe

[06lariat4x4]

thats what i was thinking because my diablosport would pour it out in park and nuetrasl... than it cost me $700 because it completely erased all the trucks computers so than i switched to the PPE

[tyhackman15]

Originally Posted by 06lariat4x4

thats what i was thinking because my diablosport would pour it out in park and neutral

Now that you included that, I agree that it is the PPE causing it.

[06lariat4x4]

hmmm well thats kind of a bummer. is there anyone who can burn me a custom tune for the ppe??

[alwil]

Yeah I think PPE might do that.....I think.

[kingranch89]

just sell it an get a SCT quit wasting your time an money