![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
| 6.0L Performance Parts Discussion What has or has not worked for you? |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Help me stack chips or add power!!!!!!
I have an 06 F250 6.0 I have bullydog intake, exhaust, and tripple dog. I just had my head studs upgraded and was wondering what more i could do to add power somewhat safely now. I just bought the sct x3 but not really sure how to use it. i only have the stock tunes and im not happy with them. I dont know how to set up the shifting properly and it was almost bouncing the gears. It was faster off the line but the shifts took way longer than the bully dog and were almost violent at times plus the bully dog felt like once it got going was pulling longer and harder.I want to stack if its possible but could I get the custom tunes( Ive heard of someone with tunes like street smoke and the same compny making a more powerful tune for sct) and then stack a chip. ive been told to stack a chip like the edge but im not sure how to do that. what are my best options now for the most power. I wanna go fast!
|
| Sponsored Links | ||
Advertisement | ||
|
|||
|
i dont think you can stack chips on any ford to make power you can use a edge monitor with a programmer tho you best bet is to get some custom tunes on your sct form on of the vendors nd youll be doin pretty good
|
|
|||
|
the best thing to do is just get a custom tuned X3 like this: SCT X3 Custom Innovative Diesel Tunning
it will outperform anything you can stack! -Raul |
|
|||
|
you cannot stack a 6.0. I would contact a tuner and get some cutom tunes for the SCT you will be much happier with the power and trans shifting.
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|