Parking aid Module

4cstr · #1 (**permalink**) 05-14-2012, 06:26 PM

We have a 2004 X Limited. Can somebody please tell me

1...where is the parking aid module located, &

2...the part number for said module.

Our backup sensor was working just fine a few days ago...and now the button on the dash lights up "off" as soon as the X is put in reverse. I hooked my AE up, and it tells me it can not communicate with the parking assist module.

Thanks
Dave

4cstr · #2 (**permalink**) 05-16-2012, 10:58 AM

I finally found the part number for the parking assist module in case anybody in the future needs it.

1C7Z-15K866-AA

Still haven't had the time to track down its location yet.

corycicuto · #3 (**permalink**) 11-04-2012, 01:15 AM

Where is this module located on the truck, mine have been doing this for ages, couldn't figure out the problem. And could anybody please post a site where u can order one from?

corycicuto · #4 (**permalink**) 11-04-2012, 01:15 AM

Thanks in advance!

**Term3** · #5 (**permalink**) 11-04-2012, 05:32 AM

Subscribed as mine has been dead for a couple years.

jeeplj8 · #6 (**permalink**) 11-06-2012, 06:55 AM

most often the problem is a loose connection or water in the connection under the bumper. Trace the wires from each of the 4 connectors and make sure they have a good solid connection.

One of mine has a hairline crack which occasionally get water in it. not worth it to me to repair as I have a b/u camera.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement