INstall my cab lights

[Diesel Freak]

Lowered my EGT's just a wee bit!
Had to tweak down pipe a bit due to vibrations to fire wall. All is good and Happy!!

Wanna do some cab lights

[colberjs]

I did mine in about three hours. As for the 1/4 inch hole, I bought small bolts with nuts and washers so that the lights would be fastened solid so that here was no chance of them falling off. Did you have a problem with the polarity on the plug-in? I had every one of mine backwards and none of the lights would come on. I was MAD for about 1-2 minutes before I figured it out.Haha!

[Adamvabeach]

Had the polarity problem with with three of them. Quick fix. Ill do the lights if you buy all the material for trade of those add-leafs??

[colberjs]

Originally Posted by Adamvabeach

Ill do the lights if you buy all the material for trade of those add-leafs??

Who are you talking too?

[Adamvabeach]

i was talking to Diesel Freak sorry

[anmetcalf]

I've done 2 sets in the last year. Both of them took me about 3 hours. They are not all that hard to do if you are just a little bit mechanically inclined. Just take you time and measure 2,3, even 4 times before drilling. That is why I liked the template.

[Adamvabeach]

Well everything is installed and working properly but the cab lights from recon only light on the front part of the light itself (I can see them lit from the front view of truck, but very diminished side view) The back of each light has some sort of block that only allows the front to light...............is this normal? and can I change it?

[Diesel Freak]

Originally Posted by Adamvabeach

Had the polarity problem with with three of them. Quick fix.


Ill do the lights if you buy all the material for trade of those add-leafs??

Sounds Good To Me!!

[Adamvabeach]

How much lift in add a leafs is it anyway?

[Diesel Freak]

I believe 2"

ProComp part#52413 B-4