![]() |
Please Visit our Site Sponsors
|
![]() |
|
![]() |
![]() |
|
|
| 6.0L Exterior Discussion Body and Accessories Talk |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
f250 dually
Has anyone tried putting dually rims and tires on the rear of a f250? I know in the older model trucks you could.
|
| Sponsored Links | ||
Advertisement | ||
|
|||
![]()
|
|
|||
|
I just wandered if dually rims would rub. If i wanted to put a flat bed on it.
|
|
|||
|
They would probably rub the leaves. DRW trucks use a wider Dana 80 axle vs the 10.5 Sterling on the SRW trucks. Also IIRC the DRW lug pattern changed in 05 to 8x200, SRW is 8x170.
|
|
|||
|
Would a 99up dually rear be a direct fit with the same lug pattern as a 06 f250?
|
|
|||
|
As long as it's a 350 DRW it should be the same. Just take a tape measure with you to the junk yard to make sure. Also, cab and chassis trucks have a narrower frame than trucks that came with a bed so the spring perches would be in the wrong place if you mixed them up.
|
|
|||
|
What rear is in the 99 duallys? What rear is in the 06 srw f350?
|
|
|||
|
They are both Dana 80's. 05+ has 8x200 and larger brakes. 99-04 has 8x170. I have also heard a rumor that a DRW 10.5 sterling was used in some gas trucks but I have never seen one.
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|