325/60/18's on 18x9 XD Badlands

**SickStroke6.0** · #1 (**permalink**) 03-26-2010, 04:57 PM

Okay, I plan on running a 2.5" Add-A-Leaf Front Leveling Kit. I have already purchased some 18x9 XD Badlands (4.53" Backspace). So here is my question:

Will 325/60/18's rub at all? I have an '03 btw. Thanks for any advice/input!

daledozer · #2 (**permalink**) 03-26-2010, 05:19 PM

Will rub on the lower valence, I used a sanding disc to round off where it was rubbing.

DIESLPILOT · #3 (**permalink**) 03-26-2010, 05:23 PM

Hey I have this setup. 325/60/18 nitto dura grapplers, eagle 18x9 and love them.they dont rub much without trimming.trimmed about one inch off of the plastic piece on the bottom of bumper and no rubbing. also it only rubbed if i put the truck in a bind or pulled heavy loads and turned full lock. if you like a fat tire its a great setup.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Powerstroke.org Advertisement